Don't have an account?
| Attribute name | Attribute value |
|---|---|
| Main | |
| Discrete I/O number | 8 |
| Product or component type | mixed discrete I/O module |
| Range of product | Modicon Quantum automation platform |
| Complementary | |
| Discrete input number | 4 1 group of 8 |
| Protection type | on input by resistor limited, on output by transient voltage suppression, internal output protection by 5 A fuse per group |
| Local signalling | 4 LEDs (red) for fault detected on the input point, 4 LEDs (green) for output is turned on, 2 LEDs (red) for fault detected on the output point, 1 LED (red) for no voltage in output and input (F), 1 LED (green) for bus communication is present (Active) |
| Fault indication | overcurrent on output |
| Addressing requirement | 1 output word, 1 input word |
| Bus current requirement | 350 mA |
| Discrete input logic | sink |
| Absolute maximum output | 30 A during 500 ms per point |
| Discrete output voltage | 24...125 V |
| Voltage state 1 guaranteed | 88...156.2 V |
| Output voltage limits | 19.2...156.2 V DC typical |
| Maximum leakage current | 1.2 mA 150 V DC |
| Voltage state 0 guaranteed | 0...36 V |
| Net weight | 0.3 kg |
| Associated fuse rating | 5 A |
| Input voltage limits | 156.2 V including ripple |
| Response time | 0.5 or 1.5 ms depending on the filter at at state 1 to state 0, 0.5 or 1.5 ms depending on the filter at at state 0 to state 1 |
| Current state 0 guaranteed | <= 1.2 mA |
| Marking | CE |
| Current state 1 guaranteed | >= 2 mA |
| Network frequency limits | 47-63 Hz |
| Isolation between channels | 1780 Vrms for 1 minute |
| Maximum load capacitance | 0.6 µF 24 V DC, 0.1 µF 150 V DC |
| Discrete output number | 4 1 group of 4 |
| Isolation between group and bus | 2500 Vrms for 1 minute |
| Maximum voltage drop | <0.75 V 4 A |
| Discrete input voltage | 125 V DC |
| Discrete output logic | source or sink |
| Isolation between group of I/O channels | 1780 Vrms for 1 minute |
| Maximum load current | <= 4 A per point, <= 16 A per module |
| Discrete output type | solid state, isolated |
| Power dissipation | 0.4 W + (1 x input point on) + (0.75 total output load current) |
| Environment | |
| Operating altitude | <= 5000 m |
| Resistance to electrostatic discharge | 8 kV on air conforming to IEC 801-2, 4 kV contact conforming to IEC 801-2 |
| Relative humidity | 95-95 % without condensation |
| Ambient air temperature for storage | -40-85 °C |
| Standards | FM Class 1 Division 2, CSA C22.2 No 142, UL 508 |
| Resistance to electromagnetic fields | 10 V/m 80-1000 MHz conforming to IEC 801-3 |
| Ambient air temperature for operation | 0-60 °C |
| Product certifications | cUL |